| Steel Grade | Chemical Composition % | |||||||
| C | Si | Mn | Cr | Ni | Mo | S | P | |
| ZG25CrNiMo | 0.25-0.30 | 0.20-0.40 | 0.70-0.90 | 0.40-0.70 | 0.40-0.70 | 0.15-0.25 | ≦0.025 | ≦0.025 |
| ZG30CrMo | 0.26-0.33 | 0.17-0.37 | 0.40-0.70 | 0.80-1.10 | — | 0.15-0.25 | ≦0.025 | ≦0.025 |
| ZG35CrMo | 0.32-0.40 | 0.17-0.37 | 0.40-0.70 | 0.80-1.10 | — | 0.15-0.25 | ≦0.025 | ≦0.025 |
| Standard | Yield Strength Rp0.2 /MPa | Tensile Strength Rb / MPa | Elogation A / % | Reduction of Area Z/ ％ |
| 60K | ≥414 | ≥586 | ≥18 | ≥35 |
| 75K | ≥517 | ≥655 | ≥18 | ≥35 |
| 80K | 585-660 | ≥725 | ≥18 | ≥35 |
Normally we will follow 75K standard.
| No. | Equipment Name | Quantity(Set) |
| 1 | Transformer substation | 1 |
| 2 | Full set of wooden molding equipment | 10 |
| 3 | Sodium silicate sand mix line | 4 |
| 4 | Alkaline phenol resin sand mix line | 2 |
| 5 | 25 tons Electric arc furnace | 1 |
| 6 | 50 tons Intermediate frequency furnace | 2 |
| 7 | 120 tons Refining furnace | 1 |
| 8 | 120 tons VD furnace | 2 |
| 9 | 12m*9m*6m Heat treatment furnace | 3 |
| 10 | 120 tons Large-scale shot blasting machine | 1 |
| 11 | 150 tons Travelling crane | 2 |
| 12 | 125 tons Travelling crane | 3 |
| 13 | 200 tons Travelling crane | 2 |
| 14 | CNC gantry boring and milling machine | 2 |
| 15 | 2.5m-10m Digital vertical lathe | 16 |
| 16 | Boring and milling machine | 13 |
| 17 | Horizontal lathe | 3 |
| 18 | Large dust removal equipment | 7 |
1)The engineer will firstly prepare the technology and do a simulation before pouring.
2)We will make a pattern of the kiln tyre based on engineer's technology.
It will cost us around one week.
After that the engineer will check the dimension and make a record.
3)Sand molding making will be made by experienced wokrers.
4)Pouring and cooling.
There are one 8tons electrical arc furnace;
Two 50 tons medium frequency furnace;
One 120 tons refining furnace and one 120 tons VD furnace;
5)Clean the sand and cut the riser before heat treatment
6)Heat treatment will cost 7days( 4 days normalizing and 3 days tempring).
There are 8 heat treatment furances with max. one is 12m*9m*6m.
7)dimension check and draw a line for machining.
8)Rough machining
9)NDT withe qualified inspector
10)Welding repair if needed and tempering for stress relief
11)Final machining and NDT
12)Customers' inspection and packing
Our company is near to Shanghai port and we can supply different packing according to customers' specification.